This TPUH4120 is an
HDBaseT Extender set consist of a transmitter and a receiver. It distributes 4K
signal up to 131ft/40m, or 1080P signal up to 230ft/70m over CAT5e/CAT6a cable.
It enables IR and RS232 pass-through to control local source device from remote
or far-end display.
TPUH412 is an
ultra-thin HDBaseT Extender set consists of a transmitter TPUH412T and a
receiver TPUH412R. It enables to distribute 1080P HDMI signal up to 230ft/70m
or 4K HDMI signal up to 131ft/40m over a single CAT5e/6 cable. It supports CEC,
bi-directional RS232&IR control, and bi-directional PoH function.
The TPUH416 is 4K
HDMI Extender which consists a transmitter and a receiver. The extender is
designed to extend 4K@60Hz 4:2:0 HDMI video to distance up to 40 meters (131
feet) and 1080P@60Hz video to distances up to 70 meters (230 feet) over a single
CATx cable. Bi-directional Power over Cable (PoC) feature allows the
transmitter or receiver to be powered by each other without the need for a
nearby AC power outlet. It supports stereo and multichannel audio on the HDMI
ports. In addition to the audio embedded in the HDMI input stream, the audio is
simultaneously de-embedded to an analog audio output and an S/PDIF audio
output.
TPUH422 is an
ultra-thin HDBaseT Extender set consists of a transmitter TPUH422T and a
receiver TPUH422R. It enables to distribute 1080P HDMI signal up to 330ft/100m
or 4K HDMI signal up to 230ft/70m over a CATx cable. It supports CEC,
bi-directional RS232&IR control, and bi-directional PoH function. The 4
Ethernet ports can work in a LAN and also access to the internet.
TPUH610A is a fully
HDMI 18G compliant HDBaseT extender set which capable of extending 4K@60Hz HDR
video up to 131ft/40m or 1080P video up to 230ft/70mover a single CAT6 cable.
It enables IR and RS232 pass through to control local source device or remote
display, and bi-directional PoC to save power supply from either Tx/Rx end.
The TPUH610S is an
HDMI 18G HDBaseT Extender, which consists of a transmitter and a receiver. It
can extend 4K video to distance up to 131 feet (40 meters) and 1080P video to
distances up to 230 feet (70 meters) over a single CATx cable. It supports
audio de-embedded and ARC. It also supports bidirectional IR and RS232
pass-through to control source or display device remotely. PoC feature allows the
transmitter and the receiver can be powered from each other and only one power
adapter is needed in system. Besides passing EDID information from the display,
there are multiple built-in EDID settings can be selected by the 4-pin DIP
switch on the front panel of transmitter.
TPUH406T- EU is a
2x1 wall plate transmitter for HDMI or VGA/audio signal, transmission at
230ft/70m, PoH function, two-gang design compatible with EU standard.
The TPUH406T-UK is
2x1 wallplate HDBaseT Transmitter for switching and extending HDMI or VGA +
audio to display or projector, and the transmission distance is up to 40m@4K
and 70m@1080p over a single Cat5e/6/7 cable based on Certified HDBaseT
technology. The resolution of HDMI input is up to 4K/UHD@ 60Hz 4:2:0 and VGA
input up to 1920x1200. UK gang design.
The TPUH406TV-US is
a 2x1 wall plate transmitter for HDMI or VGA/audio signal. Extending signal up
to 70 meters (230ft) over a single Category cable. Certified HDBaseT technology
for a complete professional installation including HD video, power, RS232
control. This device uses Power over HDBaseT (PoH) to provide the flexibility for
powering the transmitter from the receiver at the display over the same
Category cable. This product is used with HDBaseT 70M extender Receiver.
The TPUH408TU-UK is a 3x1
Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or
Slimport input signal to far-end display device, and the transmission distance
is up to 131ft/40m at 4K and 229ft/70m
at 1080P video by using a single CATx cable.