THe WUH3C-8K is an HDMI 8K 3x1 Switcher. 

It is an auto switcher with three HDMI video inputs and one HDMI output. 

It supports HDMI video resolution up to 8K@60Hz 4:2:0 HDR and Dolby Vision. 

The switcher can be controlled via IR with the remote, or from the source button on the front panel of the switcher.

The WUH4ARC-8K is an auto switcher with four HDMI video inputs and one HDMI output. This switcher supports HDMI video resolution up to 8K@60Hz 4:2:0 HDR+ and High Definition audio. Except passing EDID information from the display, there are multiple built-in EDID settings to simplify an installation. The switcher will de-embed digital stereo audio to provide an analog audio source for an existing audio system. The switcher also supports enhanced audio return channel (eARC) for transmitting audio back to HDMI input port from the connected display.

The WUH3C-H2 is an HDMI 18Gbps 3x1 Switcher. It is an auto switcher with three HDMI video inputs and one HDMI output. It supports HDMI video resolution up to 4Kx2K@60Hz 4:4:4 HDR, Dolby Vision and multichannel audio.

The WUH4ARC-H2 is a HDMI 18Gbps high bandwidth 4x1 switcher with audio de-embedded, support ARC and EDID management.

The BYOD-E is an HDMI 18G 3x1 Multi-format Presentation Switcher converting AV signal from HDMI, Mini DP and USB-C inputs to HDMI output.

The BYOD is a Multiformat Presentation Switcher converting AV signal from Lightning, USB-C, MINI DP, DP, HDMI type-A and HDMI type-D to HDMI.

The SCU41E allows selection of four different sources (three HDMI inputs and one DisplayPort input), and will simultaneously switch the selected video to HDMI output. It supports video resolution up to 4Kx2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is the smart built-in EDID setting can be selected by the 4-pin DIP switch on the rear panel.

The SCU61E allows selection of six different sources (three HDMI inputs, one USB-C input, one DisplayPort input and one VGA input), and will switch the selected video to HDMI output. It supports video resolution up to 4Kx2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is the smart built-in EDID setting can be selected by the 4-pin DIP switch on the rear panel.

The SCU41-MV is seamless 4K Multi-view scaler switcher designed to enable a true 4K display. The switcher features four HDMI inputs and one HDMI output which allows you to display four video sources on one display. It also provides a line input, 1 mix input, 1 SPDIF output and 1 analog output for audio processing.

The SCU41TS offers four HDMI, one display port and one USB-C inputs along with mirrored HDMI and HDBaseT outputs. The HDBaseT output supports PoC and can be paired with a compatible HDBaseT receiver to extend 4k@30Hz/1080P signal up to 40 meters (131ft) / 70 meters (230ft) all over a single CATx cable.

The SCU42 consists of four HDMI inputs, two HDMI matrix outputs and full HDMI 18Gbps support. The product offers SPDIF and 3.5mm output for dual HDMI OUT audio extraction and dual HDMI OUT ARC along with 4K to 1080p down-scaling functionality. The SCU42 features a wide range of control flexibility via Web, RS232, IR and smart EDID management.

The SM42T is a 4x2 HDMI 18G presentation switcher with an HDBaseT receiver. The switcher is designed to switch HDMI or DP video signal to HDMI and HDBaseT output. It provides three HDMI inputs, one DP input, one HDMI output and one HDBaseT output. The HDBaseT output supports PoC and can connect compatible HDBaseT receiver up to a maximum of 70 meters (230 feet).

The switcher supports stereo and multichannel audio on the HDMI or DP input. In addition to the audio embedded in the HDMI and HDBT output stream, which may be muted, the audio is simultaneously de-embedded to an analog audio output.