SUH28-H2

SUH28-H2 is a 2 x 8 HDMI 18Gbps high bandwidth splitter, with 8 HDMI outputs splitter and 2 sources selection, supports HDMI 4Kx2K@60Hz4:4:4.

SUH141T-H2 KIT

The SUH141T-H2 accepts a single HDMI input and splits it into one HDMI and four HDBaseT outputs. The splitter is designed with an HDMI loop out and loop in which are intended to cascade to additional units. It supports video resolutions up to 4K@60Hz 4:4:4 8bit and all HDMI audio formats. It can extend 1080p signals on each output to distance up to 229 feet (70 meters) and 4K signals to distance up to 131 feet (40 meters) over a single CATx Ethernet cable. It supports the Power over HDBaseT (PoH) feature, which allows the receivers to be powered from the splitter over the Ethernet cables. It supports bidirectional IR and RS232 pass-through and loop output.

NPG-DA24T KIT

The NPG-DA24T KIT is a 2x4 HDMI Splitter Kit over CATx cable, it distributes either one of two HDMI inputs to one HDMI and four CATx outputs. The splitter is designed with an IR loop out which is intended to cascade to additional units. It supports video resolutions up to 4K@60Hz 4:4:4 8bit and all HDMI audio formats. It can extend 1080p up to 262 feet (80 meters) and 4K signals to distance up to 229 feet (70 meters) over a single CATx Ethernet cable. It supports 12V PoC feature, which allows the receivers to be powered from the splitter over the Ethernet cables. It supports bidirectional IR pass-through, IR cascade and RS232 control.

DAN-D1

The DAN-D1 is a Dante Dangle. It connects to your Dante network and supports 2X2 channels of bidirectional audio, allowing PC and mobile device to playout and receive audio with your Dante devices using a USB-A/C connection.

DAN-D2

The DAN-D2 is a Dante Dangle. It connects to your Dante network and supports 2X1 channels of wireless audio, allowing PC and mobile device to playout and receive audio with your Dante devices using a Bluetooth connection.

DAN-D4

The DAN-D4 is a Dante Dangle. It connects to your Dante network and supports Analog 0X2 channels audio, allowing to connect analog amplifier to your Dante audio network.

DAN-D5

The DAN-D5 is a Dante Dangle. It connects to your Dante network and supports Analog 2X0 channels audio, allowing receive analog audio signal, convert the analog signal to digital signal and transmit through Dante network.

DAN-B202

The DAN-B202 is a Dante network audio interface allowing users to integrate up to 2 x 2 audio channels of Dante audio into networked AV systems, each input features a 48V phantom power option. The product also supports PoE (IEEE802.3af) power capability and a small form factor that makes it easy to put Dante connectivity wherever it's needed and it can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.

CVDAC

CVDAC is a Digital Audio Converter, which is designed to convert coaxial or Toslink digital audio input to analog L/R and 3.5mm audio output. Simultaneously, the converter provides COAX SPDIF output for digital audio extension.

CE-CVAD

The CE-CVAD is a small-size HDMI 18Gbps high bandwidth audio de-embedder with 1 HDMI input, 1 HDMI output, and three kinds of audio outputs. It is designed to extract audio from 4K HDMI signal via stereo balanced L/R audio, analog RCA, and coaxial digital audio output ports. It supports 4K@60Hz 4:4:4 HDR, EDID & CEC pass-through, and the transmission rate is up to 18Gbps.

TPA33

TPA33 is an audio extender, includes a transmitter TPA33T &a receiver TPA33R. It distributes audio signal via CATx cable at 328ft/100m with PoC function from Rx to Tx. It also provides TOSLINK, COAX and STEREO audio inputs.

PA2B

PA2B is a compact-size digital amplifier (Class-D) with 3 inputs (2 line in and 1 balanced MIC). It is integrated with powerful functions, including bridge connection, dual-mono, EQ control, microphone mixer etc.